Applies to:

• 100% cotton
• Poly/cotton blends
• 100% polyester
• 100% Poly & Cotton Blends
• Lycra & Spandex
• Sublimated Polyester
• Neoprene

Application instructions (home iron)

Set iron dial between Cotton and Linen
Cover design with Kraft paper or non-stick cover sheet
Place on flat, hard surface (ironing board not recommended)
Press iron with medium/firm pressure (do not slide iron)
Press each section of design for 10-15 seconds
If areas of design lift after application, replace cover sheet
and re-press for 5-10 seconds
Warm Peel

Application Instructions (heat press)
Cut in reverse
Weed excess material
Preheat garment for 2-3 seconds
Apply design at 305F/150C
Use medium pressure for 10-15 seconds
Warm Peel