Technical Guide Adhere to
Thickness 10(70) micron
Temperature 140-150
Pressure Medium 100% Cotton
100% Polyester
100% Poly & Cotton Blends
Lycra & Spandex
Sublimated Polyester
Neoprene
Adhesive Sticky
Time 8-12 sec
Peel Hot, Warm Peel Cutter Blade Washing Condition Storage Condition
Blade Blade:45 Detergent
Standard(Household) Do not twist strongly Cool and dry place
without direct Sunlight Dont use Steam
Avoid direct contact 60 or below

Application instructions (home iron)

Cut material mirror your design!
Weed excess material
Set iron dial between Cotton and Linen
Cover design with Kraft paper or non-stick cover sheet
Place on flat, hard surface (ironing board not recommended)
Press iron with medium/firm pressure (do not slide iron)
Press each section of design for 15 seconds
If areas of design lift after application, replace cover sheet
and re-press for 10 seconds
Peel carrier Warmor cold

Application Instructions (heat press)

Cut material mirror your design
Weed excess material
Preheat garment for 2-3 seconds
Apply design at 305F/150C
Use medium pressure for 8-12seconds
Peel carrier WarmorCold