Application instructions (home iron)

Cut material dont mirror!
Weed excess material
Mask with TTD High Tack Mask
Set iron dial between Cotton and Linen
Cover design with Kraft paper or non-stick cover sheet
Place on flat, hard surface (ironing board not recommended)
Press iron with medium/firm pressure (do not slide iron)
Press each section of design for 15 seconds
If areas of design lift after application, replace cover sheet
and re-press for 10 seconds
Peel carrier Warmor cold

Application Instructions (heat press)

Cut material dont mirror!
Weed excess material
Mask with TTD High Tack Mask
Preheat garment for 2-3 seconds
Apply design at 305F/150C
Use medium pressure for 8-12seconds
Peel carrier WarmorCold